Positve Displacement Pumps

USED WAUKESHA POSITIVE DISPLACEMENT LOBE TYPE PUMP MODEL 220, SERIAL # 8263SS. FEATURES MANUFACTURERS MAXIMUM PERFORMANCE RATING OF 300 GPM @ 200 PSI @ 600 RPM, DIRECT COUPLED TO REEVES 7.5 HORSEPOWER VARIABLE SPEED DRIVE, TEFC, 38.8 TO 155 RPM YIELDING 19.7 TO 79 GPM, 4" INLET AND OUTLET WITH TRI CLAMP CONNECTIONS, 316 SS BODY, COVER AND LOBES. O RING TYPE SHAFT SEALS, 230/460 3 PHASE VOLTAGE (WIRED FOR 440 SERVICE), MOUNTED ON STAINLESS STEEL TUBULAR STATIONARY FRAME WITH LEVELING FEET. FORMERLY USED IN BRANDED FOOD PRODUCTS.

Unused 25HP positive displacement pump. Manufactured by Gardner Denver. Model GAFMCRD. Sutorbilt Legend series. Inlet/outlet 4". Capacity 292 CFM @11PSIG. Sound Attenduating enclosure. 45" x 45" x 48" tall. Serial #S37810. Built 2011.

Used 20HP Knoll Progressive Cavity Pump, Model MX50S-80/20, 316 Stainless Steel. Capacity 6,000 GPH. Revolutions 205 rpm. Stator EVEN WALL 80/20. Standard rotor. Suction housing 4" tri-clamp, discharge nozzle 4" tri-clamp, CIP nozzle 3" tri-clamp. Driven by approximate 22kW, 3/60/230/460 volt motor. Last running orange pulp. Built 2013.

2015 SPX 15 hp Positive Displacement Pump, M/N 220 U1, S/N 3034802 R2-9, with Aprox. 4" Thread Type Inlet/Outlet, with Baldor 1765 RPM Motor (LOCATED IN CHAMPAIGN, IL)

WCB 15 hp Positive Displacement Pump, M/N 130, S/N 276659, with Reliance 1755 RPM Motor, 230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

UNUSED POSITIVE DISPLACEMENT SINE (SINUSOIDIAL) CURVE PUMP BY MASO PROCESS PUMPS (GERMANY) TYPE (MODEL) SPS-6, SERIAL # 99711748. FEATURES 316 STAINLESS STEEL AND POLYMER CONSTRUCTION MEETING 3A SANITARY STANDARDS, 6" INLET x 4" OUTLET WITH 11" EIGHT BOLT FLANGED CONNECTION @ INLET AND 9" EIGHT BOLT FLANGED CONNECTION @ OUTLET, MOUNTED ON STATIONARY PAINTED BASE WITH 10 HORSEPOWER IN LINE GEAR DRIVE BY SEW EURODRIVE INC. USA, 22.37 TO 1 IN LINE GEAR REDUCER DIRECTLY COUPLED TO PUMP PRODUCES PUMP SPEED OF 78 RPM YIELDING 51.5 GPM (MAX GPM 396 @ 600 RPM), 230/460/ 3 PHASE VOLTAGE, 25/12.5 AMPS, 24" WIDE x 66" BASE STATIONARY FLOOR MOUNT BASE. FROM PHARMACEUTICAL FACILITY.

2014 SPX 10 hp Positive Displacement Pump, M/N 130U1, S/N 2943645 R2-3, with Reliance 3500 RPM Motor, 230/460 Volts, 3 Phase, with Mennekes On/Off Switch, with Aprox. 3" Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

2015 SPX 10 hp Positive Displacement Pump, M/N 130U1, S/N 3028336 R2-3, with Reliance 1755 RPM Motor, 208-230/460 Volts, 3 Phase (NOTE: Missing Pump Head & Impellers)

WCB 10 hp Positive Displacement Pump, M/N 130, S/N 356315 04, with Baldor 1770 RPM Motor, 208-230/460 Volts, 3 Phase

Waukesha Cherry-Burrell 7.5 hp Positive Displacement Pump, M/N 060, S/N 253845, with Baldor 1760 RPM Motor, with Aprox. 3" Clamp Type Inlet/Outlet, 230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

Waukesha 7.5 hp Positive Displacement Pump, M/N 60, S/N 115550, with Baldor 1770 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Waukesha 7.5 hp Positive Displacement Pump, M/N 130, S/N 145 321 P1-0, with Baldor 1770 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 3" Clamp Type Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Used 2.5" hose pump/7.5 horsepower by Motorvario Motor (Italy) directly coupled to pump with Motorvario 33. 72 to 1 gear reducer for final pump rotor speed of 51. 9 rpm, estimated gpm @ . 76 per revolution is 38, voltage 208-230/460/3 phase, 60 hz, amps 22. 5/21. 5/12. 4, 1740/1750/1760 rpm, four bolt 7" diameter companion flanges at inlet and outlet reduced to 2. 5" and 2" tri clamp connections, pump housing can mount in any of four positions to accommodate application, painted steel construction with vibration dampening floor feet, pump rotor contained in lubricant filled housing with view window and fluid sight glass.

Used MOYNO Pump, Model 1FF10 SSV, Trim FAE. 4" Inlet/outlet with sanitary connections. Rated approx. 60 to 130 GPM and up to 87 PSI. Mounted on base with SEW Drive. 7.5 HP, 1765 RPM, 460 volt motor into Gear reducer model R70LP, 4.16:1 ratio. (Qty 2 available)

2012 Waukesha Cherry-Burrell 7.5 hp Positive Displacement Pump, M/N 130 U1, S/N 2739115R2, with Reliance 1765 RPM Motor, 208-230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

2019 SPX 5 hp Positive Displacement Pump, M/N 130 U1 R2, S/N 1000003762586, with Reliance 1750 RPM, 208-230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Waukesha Cherry Burrell 5 hp Positive Displacement Pump, M/N 060, S/N 17826396, with 2-1/2" Clamp Type Inlet/Outlet, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

SPX 1.5 hp Positive Displacement Pump, M/N 030 U1, S/N 1000003000409, with Baldor 1755 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on S/S Frame (LOCATED IN CHAMPAIGN, IL)

Used Watson Marlow Model 620N Peristaltic Pump with STA-PURE tubing, Same side inlet outlet. NEMA 4X IP66.

WCB Positive Displacement Pump Head, M/N 060, S/N 043168 06 (NOTE: Missing Head, Rotors, & Motor)(LOCATED IN CHAMPAIGN, IL)

Waukesha Positive Displacement Pump, M/N 130, S/N 276659 00, with S/S Head, with Reliance 3510 RPM Motor, 208-230/460 Volts, 3 Phase (LOCATED IN CHAMPAIGN, IL)

Used Portable Rotary Lobe Pump. Manufacuted by ProcessFlo. Serial #1004274

Used Progressive cavity pump, manufactured by Lenze, type 11.740.04.00, stainless steel contacts, 1-1/2" inlet/outlet, driven by 0.55kw (3/4 HP) motor. Serial number 6/7006/1014. Good condition.