Rotor for stage 1 of Ingersoll Rand (Dresser Rand) Compressor Set, Model CVM-4FIC/E-520, Capacity 44,450 ICFM. Previous Use – Nitric Acid Plant Compressor Train

Rotor for Terry Steam Turbine – Part of Compressor Set - Model GHF-4. Previous Use – Nitric Acid Plant Compressor Train

Rotor for stage 2, 3 and 4 of Ingersoll Rand (Dresser Rand) Compressor Set, Model CVM-4FIC/E-520, Capacity 44,450 ICFM. Previous Use – Nitric Acid Plant Compressor Train

Rotor for stage 2, 3 and 4 of Ingersoll Rand (Dresser Rand) Compressor Set, Model CVM-4FIC/E-520, Capacity 44,450 ICFM. Previous Use – Nitric Acid Plant Compressor Train

Used 354 MTPD Nitric Acid Plant built in 1970. Designed by Weatherly (Referred to as Ammonia Oxidation Plants). Estimated actual operating time is less than 3 years. Originally installed at the Radford Army Ammunition Plant in Radford, VA. Its nameplate capacity is 390 STPD (354 MTPD). It has been dismantled, and the equipment is currently stored and ready for shipment. Although some process equipment has been removed, major equipment is available such as the compressor train and heat exchanger train with unused components. If you are interested in purchasing individual pieces, view components details at the following link: http://www.phxequip.com/liquidation.22.0/nitric-acid-plant-liquidation.aspx

Ingersoll-Rand Steam Turbine Driven Compressor with Spare Rotors. Includes: Compressor Stage 1, 2, 4, 3; Steam Turbine; Intercooler 1 and 2 with spare bundles; Lube Oil System. 44,450 CFM @ 134 PSI Used Compressor Train includes: Compressor - Speed 8200 rpm, Drive power 9020 HP, Disch. Press. 120 psig, Temp. Out 345 F, 4 Stages, Capacity to Process 36,739 SCFM (dry) (SCFM 14.7 psia & 60 F), Capacity (including air) 44,455 CFM. Stage 1 (with spare rotor): 1st critical speed 10,320 rpm, Max Temp 450 F, Max Oper. Press. 30 psig. Stage 2, 4, 3 (with spare rotor): 1st critical speed 5700 rpm, 2nd critical speed 12,900 rpm, Max Temp. 450 F, Max. Oper. Press. variable to 120 psig. Steam Turbine: Speed 8200 rpm, normal HP 1130 HP, Start-up HP 3000 HP, Steam In. 250 psig, Steam Temp. 406 F, Start-up steam 47,600 lbs/hr, Normal steam 12,700 lbs/hr, Start-up Ex. Press. 9" Hg absolute, Normal Ex. Press. 3" Hg abs., No. Stages 4 (with rotors, steam ejector, steam condenser). Cooling Water Data: Lube oil cooler 107 gpm, Surface condenser 1143 gpm, Start-up surface cond. 2350 gpm, No. 1 intercooler 610 gpm (with spare bundle), No. 2 intercooler 550 gpm (with spare bundle), Absorber 3120 gpm, Product cooler 205 gpm. Total Cooling Water: Normal 5735 gpm, Start-up 6942 gpm. Expander (Note: Missing Expander): Speed 8200 rpm, 8250 HP, Press. Inlet 85 psig, Temp. Inlet 1250 F, No. Stages 5, Disch. Temp. 640 F. Previous Use: Nitric Acid

Steam Turbine (Air Compressor Train) with Spare rotor

Used 1040 Sq. Ft American Standard Power & Controls Group Horizontal Exchanger. Serial # 83G10363-01, National Board # 39796, Built 1984

Used Nitric Acid Plant Ammonia Air Mixer (Converter Cone). Manufactured by Missouri Boiler and Tank Company, Stainless Steel. Rated 135 psi @ 650 F. Flg "A" 135 psi @ 550 F. Shell thickness 3/16" and 5/16". Head thickness 169 min, Head raidus 211. Serial # H-5235, National Board # 3133, Built 1971. Previous Use: Nitric Acid - Ammonia Air Mixer / Converter (Note: Converter and Converter Elbow not available but drawings are available)

Unused 1900 Sq. Ft. Reco Industries Horizontal Stainless Steel Shell & Tube Heat Exchanger, rated 285 psi @ 600 F. Serial # N6439.10, National Board # 81414, Built 1985. Previous Use: Nitric Acid - Waste Heat Boiler (Spare)

Used 1900 Sq. Ft. Reco Industries Horizontal Stainless Steel Shell & Tube Heat Exchanger, rated 285 psi @ 600 F. Serial # N6439.20, National Board #P700, Built 1984. Estimated weight 24,000 lbs. Previous Use: Nitric Acid - Waste Heat Boiler

Used 991 Sq. Ft. Horizontal 304L Stainless Steel Shell & Tube Heat Exchanger. Rated 135 psi @ 775 F on the shell, and 135 psi @ 700 F on the tubes. Serial # H5239, National Board # 3136, Built 1971. Previous Use: Nitric Acid - Air Heater

Unused 3695 Sq. Ft. Horizontal Reco Industries lnconel Shell & Tube Heat Exchanger. Stainless steel shell rated 120 psi @ 550 F on the shell, and Inconel tubes rated 135 psi @ 650 F. (1815) Tubes - 3/4" dia x 11'L. Serial # N6439.30, National Board #81444, Built 1985. Previous Use: Nitric Acid - Tail Gas Heater (Spare)

Used 3695 Sq. Ft. Horizontal Reco Industries lnconel Shell & Tube Heat Exchanger. Stainless steel shell rated 120 psi @ 550 F on the shell, and Inconel tubes rated 135 psi @ 650 F. Serial # H-5240, National Board #3137, Built 1971. Repaired - 1984. Previous Use: Nitric Acid - Tail Gas Heater

Used 2444 Sq. Ft. Horizontal Missouri Boiler & Tank Company 304L Stainless Steel Shell & Tube Heat Exchanger. Shell rated 75 psi @ 475 F on the shell, and tubes rated 125 psi @ 475 F. Serial # H-5232, National Board #3125, Built 1971. Previous Use: Nitric Acid - Cooler Condenser, Stage 1 (Used in line - No Heads)

Used 2781 Sq. Ft. Horizontal Missouri Boiler & Tank Company 304L Stainless Steel Shell & Tube Heat Exchanger. Shell rated 75 psi @ 475 F on the shell, and tubes rated 125 psi @ 475 F. Serial # H-5233, National Board #3131, Built 1971. Estimated weight - 15,000 lbs. Previous Use: Nitric Acid - Cooler Condenser, Stage 2 (Used in line - No Heads)

Used 1600 Gallon Horizontal Missouri Boiler & Tank Company 304L Stainless Steel Tank. Tank rated 125 psi @ 475 F. Dimensions: 4'6" ID x 13'8" T./T. Serial # 5234, National Board #3135, Built 1971. Previous Use: Nitric Acid - Cooler Condenser, Stage 3

Used Asborber Tower Manuf. By Metal Arts Company. Column: 11'0" ID x 78' Height, Wall thickness 0.53", Design Press. 125 psig @ 200 F, Wind Load 30 lb. / Sq. Ft., Tray Spacing: Tray 2 = 50", Tray 3-27 = 26" (No. of trays 27). Tray Design (for absorption): Cross-Flow, 316 caps, 6" square pitch, 19 rows, Downtmr. 3-3 1/2" Sch. 10S pipe/tray, Weir ht. All trays 3 1/2", Weepholes None (3), Defl. Max. 1/8" @ center, Level Max. 1/8" in 10'0". Cap design (for Absorption): Bubble cap type, Cap. OD 3", Cap BWG 16, Cap Height 4 1/8" (tray 1) 4" (trays 2-27), No. of slots 38, Slot width 1/8", Slot height 1 1/4", Skirt height 4 1/8" (tray 1) 4" (trays 2-27), Skirt clear. none, Riser OD 2", Riser BWG 16, Riser height 3 5/8"(tray 1) 3 1/2" (trays 2-27). Tray 1-2 = 279 Sq. Ft, Tray 3-12 = 232 Sq. Ft., Tray 13-26 = 93 Sq. Ft., Tray 27 = 0 Sq. Ft. All materials to be 304L SS, except skirt to be 304 SS. Built 1971. Previous Use: Nitric Acid - Absorber Tower

Used 350 Sq. Ft. Horizontal Missouri Boiler & Tank Company Stainless Steel Shell & Tube Heat Exchanger. Steel shell rated 285 psi @ 475 F on the shell, and Stainless steel tubes rated 125 psi @ 475 F. Serial # H5240, National Board #3138, Built 1971. Previous Use: Nitric Acid - Tail Gas Preheater

Exhaust Stack

Used 46" Dia Brink System's Platinum Filter (Platinum Recovery). Dimensions: 46" ID x 1/4" thick x 7' 10" length, 110 psig @ 421 F operating. Outlet end provided with removeable coned-down spool with flanged outlet to match pipe to cooler condenser. Internal flange and support rack provided for holding cartridge type filter. Shell & internal fittings SA-240-304-L, Flanges SA-181-II, Gaskets 304 SS. Previous Use: Nitric Acid - Platinum Recovery Filter

Used 50.1 Sq. Ft. Bos-Hatten Inc. Horizontal Heat Exchanger. Steel shell rated 80 psi @ 400 F, Stainless steel tubes rated 135 psi @ 400 F. Serial # 11919, National Board # 692, Built 1971. Previous Use: Nitric Acid - Bleach Air Cooler

Used 194 Sq. Ft. Bos-Hatten Inc. Horizontal Shell & Tube Heat Exchanger. Carbon Steel shell rated 75 psi @ 200 F, Stainless Steel "U" tubes rated 125 psi @ 200 F. Serial # 11944-B, National Board # 711, Built 1971. Previous Use: Nitric Acid - Product Acid Cooler

Used 194 Sq. Ft. Bos-Hatten Inc. Horizontal Shell & Tube Heat Exchanger. Carbon Steel shell rated 75 psi @ 200 F, Stainless Steel "U" tubes rated 125 psi @ 200 F. Serial # 11944-A, National Board # 710, Built 1971. Previous Use: Nitric Acid - Product Acid Cooler

Used 2473 Sq. Ft. Fin Fan Heat Exchanger, Rated 325 psi @ 650 F. (180) 1" CS A178A Tubes x 6' L. Weight - 9000#. Manufactured by Kentube Company, Built 1971. Previous Use: Nitric Acid - Economizer

Used 604 Sq. Ft Fin Fan Heat Exchanger, Rated 55 psi @ 650 F. (44) 1" CS A178A Tubes x 6' L. Weight - 9000#. Manufactured by Kentube Company, Built 1971 (designed with stock #7439). Previous Use: Nitric Acid - Treated Water Heater

Used 1150 Sq. Ft. Shell & Tube Heat Exchanger. Shell rated 110 psi @ 1450 F, SA 249-304 Tubes rated 110 psi @ 1200 F. U-Tube design, Mfg by Missouri Boiler & Tank Company, Serial #L-1188, Built 1971. Previous Use: Nitric Acid - Tail Gas Interchanger

Used 56.5 Sq. Ft. Richmond Engineering Vertical Carbon Steel Shell & Tube Heat Exchanger. Shell rated 250 psi @ 320 F, Tubes rated 300 psi @ 500 F. Serial # L-15072, National Board # 64094, Built 1971. Previous Use: Nitric Acid - Butane Vaporizer-Superheater

Used 135 GPM Johnston Pump Co Boiler Feedwater Pump at 773 Ft Total Head. 9 Stage vertical turbine pump, 3510 RPM, Graphite Bearings.

Used 135 GPM Johnston Pump Co Boiler Feedwater Pump at 773 Ft Total Head. 9 Stage vertical turbine pump, 3510 RPM, Graphite Bearings.

Used 1,020 gallon Spray Deaerating Heater, ASC manufacturing Co, Model 60 M-10T HBS. Rated 35 psi / FV @ 650 F. Material of construction: Steel. Serial # K71-102, National Board # 6275, Built 1971. Shipping weight - 4,254 lbs.